Soldering Stations and Accessories | Swaytronic

2 in 1 soldering station Yihua-995D+ Ultimate power and performance. - Uncompromising quality. The 995D+ now has a large LCD screen and you can change the digital display for the temperature of the soldering iron and hot air from "Celsius to Fahrenheit" simply by pressing a button.This unit is controlled by a Samsung Dual Core microcomputer processor with programmable PID computer control technology and uses the latest PID high-end precision program. This gives this unit very precise temperature control, high stability, durability and reliability.This unit also incorporates "Temperature Compensation Technology" which allows for quick correction to maintain a stable tip temperature Also, the temperature of the heat gun can be adjusted from 100°C to 480°C and the soldering iron from 200 °C to +480 °C.   Independent calibration for both the heat gun and the temperature of the soldering iron for the current working conditions.  Air flow and temperature can be easily adjusted. The soldering iron can also be programmed for a "snooze mode" when the desired number of minutes without use (0 - 99 minutes) has been reached. This is very practical and saves electricity.  This model also has 2 "quick memory" buttons for presetting the desired temperature for both the soldering iron and the heat gun. Heat gun with "cold air or hot air" function.The heat gun can also be programmed for either "manual or automatic mode" and it also has an "automatic cool down" function, which means that the heat gun switches to "cold air phase". After it has been placed in its holder and cooled down to a temperature of 100 degrees Celsius, it enters a standby mode and the air continues to flow. When it has cooled down to 70 degrees Celsius, the air flow stops and the unit can be safely switched off. This is a safety feature to prevent damage to the heating element and the unit. The heat gun and soldering iron can be used separately without interfering with each other. This ensures fast heat-up and stable, accurate temperature control, which at the same time is not affected by air flow to achieve lead-free soldering and desoldering. Especially suitable for assembling and reworking SMD components by hand.  The ceramic heating element and sensor in this soldering iron ensure a very fast heat-up temperature and fast temperature recovery. You will also appreciate that the heat gun has a new protection function. If the air flow stops while using the hot air gun, the heating element of the gun stops heating to prevent damage to the heating air gun, which improves the safety performance of this product.  A 75 Watt output soldering iron with a temperature range of 200 °C - 480 °C with an extremely flexible silicone cable. Intelligent temperature detection, no-load protection, short circuit protection and overload protection.  Suitable for SOIC, CHIP, QFP, PLCC, BGA and temperature sensitive components.  Suitable for heat shrinking, drying, paint removal, viscosity removal, de-icing, pre-heating and hot gluing Scope of delivery: Main unit + gun + power cable Manual Soldering iron handleSoldering iron stand + gun frame + cleaning sponge 4 nozzles1 piece IC Pick-up

3 in 1 soldering station Yihua-853D+ Ultimate power and performance. -Uncompromising quality. This 3-in-1 unit is based on the company's revolutionary, innovative design and meets the most demanding requirements on the market. The unit uses the latest chip technology and includes a 30V/5ADC power supply, heat gun and soldering station! The unit is space-saving and practical, powerful and energy-efficient.  This unit can meet just about all the basic requirements of a soldering station !Temperature controls with core technology and microprocessor PID programming for 100ms high-speed real-time tracking of heat gun output temperatures with real-time calibration! Output temperatures are extremely stable.With PID high-speed temperature calibration in 100ms, conversions are energy efficient and deliver constant power consumption for temperature at a much lower level than comparable devices, which means greater energy savings! The YH soldering iron has a high-temperature silicone cable (damage-free when the 300º hot soldering tip touches the silicone for 30 seconds); the heating element uses a  high-power heating element for fast temperature compensation, especially suitable for desoldering raw ends, large joints and hard-to-reach places, as well as for general soldering and joint desoldering.AC stabilised high-speed power supply with continuously adjustable output voltage of 0 - 30V and output power of 0 - 5A. The power supply also has overload protection. The unit also has a voltmeter interface and can replace a high-precision digital voltmeter for AC voltage measurements.The cable of the hot air gun handle also uses a high temperature silicone, and a quiet brushless driven fan and state of the art ceramic framed heater core for extremely smooth and reliable performance!  The unique anti-blocking function of the ABS fan ensures the highest possible safety. If the fan stops working unexpectedly and the working stability can no longer be controlled, the system immediately disconnects the heat gun from the power supply to ensure safety for the user and the environment.A/mA conversion function. PID programming information: The core algorithm sets a frequency for measurements, comparisons and executions divided into 20 ms for fast, 100 ms for very fast and 200 ms for high  speed . Temperature control for heat gun and soldering iron! PID is one of the most important parameters for temperature accuracy and stability! In cycles of 20ms for each 50Hz half-wave, the programme already has precise controls for each power supply cycle.A variant of the high end YIHUA hot air gun models uses Fast 20ms cycles and the temperature calibration of the soldering iron is set to the two standard cycles High-Speed 100ms and High-Speedl 200ms because the temperature sensor is inside the ceramic heater core.  Timing for temperature transfer to the tip of the soldering iron and back: 100ms high-speed cycles provide optimal speed control! Scope of delivery: Main unit + Hot air gun + Power cable Manual Soldering iron handleSoldering iron stand + Gun frame + Cleaning sponge 4 nozzles1 piece IC Pick-up

Anti-Static Tweezers Set Scope of delivery: Anti-Static Tweezers Set

Cleaning sponge Scope of delivery: Cleaning sponge

Hot air dryer Swaytronic Hot air dryer with digital temperature display.The temperature is adjusted with an integrated dial. The fan power can be adjusted in 3 steps. Temperature range from 100 C °- 590C ° Scope of delivery Hot air dryer

Solder 0.8mm 250g Material: Tin/lead:     63/37Flux content:      1.2%Colour:                       silverMelting point:          183 degrees Celsius Type:                          CoreWire diameter:     0.8mm & 250g Scope of delivery: 1x solder tin 0.8mm 250g

Solder 0.8mm 550g Material: Tin/lead:     63/37Flux content:      1.2%Colour:                       silverMelting point:          183 degrees Celsius Type:                          CoreWire diameter:     0.8mm & 50g Scope of delivery: 1x solder tin 0.8mm 50g

Soldering iron for 937D+ / 853D+ Matching soldering iron for 937D+ / 853D+ soldering stations

Soldering iron for 995D+ Matching soldering iron for the995D+ soldering station

Swaytronic KT-1801 Soldering Platform with Zwilling Pliers (Without Accessories) Soldering made easy with the KT-1801!The KT-1801 soldering platform is the ideal soldering tool and a must for every model maker.The two arms can be rotated up and down 180 degrees and also 360 degrees around their own axis.The pliers are solid and thanks to their finely serrated shape they are compatible with any connector system.The KT-1801 will make your work massively easier, four hands instead of two, insensitive to heat, adaptable and time-saving! Scope of delivery: 1 x soldering platform with twin tongs

Soldering rod holder with magnifying lamp Scope of delivery: 1x soldering rod holder with magnifying lamp

Yihua-937D+ soldering station Ultimate power and performance. - Uncompromising quality. 1.This soldering station offers optimum fast heating, fast temperature compensation, high precision and steady temperature control. 2. Anti-static design prevents damage to sensitive components.3.Our unit uses high quality metal heating that will not twist and is highly durable.5.This model has automatic error detection and alarm functions. Scope of delivery: Main unit Soldering iron handle (with iron tips and heating element) Piston stand High temperature resistant spongeOperating instructionsMains plug

Soldering tip 900M-1.2D Scope of delivery: 1 x soldering tip 900M-1.2D

Soldering tip 900M-1.2LD Scope of delivery: 1 x 900M-1.2LD soldering tip

Soldering tip 900M-1.6D Scope of delivery: 1 x 900M-1.6D soldering tip

Soldering tip 900M-3C Scope of delivery: 1 x 900M-3C soldering tip

Soldering tip 900M-B Scope of delivery: 1 x 900M-B soldering tip

Soldering tip 900M-I Scope of delivery: 1 x 900M-I soldering tip

Soldering tip 900M-IS Scope of delivery: 1 x 900M-IS soldering tip

Soldering tip 900M-K Scope of delivery: 1 x 900M-K soldering tip

Soldering tip 900M-SI Scope of delivery: 1 x 900M-SI soldering tip

Soldering tip set 10 pieces Scope of delivery: 1 x 10-piece soldering tip set

Soldering tip thermometer Scope of delivery: 1 x soldering tip thermometer

Tweezers YH-T2-11 Scope of delivery: 1x tweezers YH-T2-11

Tweezers YH-T2-12 Scope of delivery: 1x tweezers YH-T2-12