Dischargers | Swaytronic
Most normal chargers are only equipped with a very low discharge capacity. This means that discharging a battery pack can feel like an eternity.
This is where our dischargers come into play. These are used alone or in conjunction with a charger. This greatly accelerates the discharge process.
This is where our dischargers come into play. These are used alone or in conjunction with a charger. This greatly accelerates the discharge process.
2 products
High quality 3in1 battery balancer / discharger / Z
High quality 3in1 battery balancer / discharger / cell monitor
This balancer can be used for Lipo and LiFe batteries. It measures the cell condition and can be used as a balancer to optimally balance the cells. In discharge mode, the cells can also be prepared for winter storage, for example.The cell charge status is displayed during the entire balancing process. This means that faulty cells can also be detected quickly before a crash is risked in flight.Supported battery types: Li-Polymer / Li-Fe:2 - 6 cells / 7.4V -22.2V
Balance Setting Range (lower limit) : 2V - 4.2V (preset with 3.3V)
Discharge Setting Range (lower limit) : 2V - 4.2V (preset with 3.9V)
Available
UPD200 Discharger 200W
UP-D200 Discharger 200W
Ultimate power and performance. - Uncompromising quality.
The new UP-D200 Discharger is here. If you too are tired of waiting for your batteries to discharge, then the UP-D200 is for you. The Discharger is not only capable of quickly and safely discharging the most common types of batteries with cells up to 6S, but is also very handy and easy to use. With 200W of charging power and up to 15A of discharging current, your batteries are quickly ready for safe storage and ready for the next use. The unit is compatible with our UP616 and UP6+ chargers.
Scope of delivery:
UP-D200 Discharger 1x Connection cable to charger1x Manual English
Available