SWAY-AM LiPo 4S 15.2V 7300mAh 45C/90C EC5
Order until 11:00 (Local time Europe/Zurich) and your selection will most likely be shipped today.
SWAYTRONIC
SWAY-AM LiPo 4S 15.2V 7300mAh 45C/90C EC5
Version
Plug-in system:
EC5
Measures:
135x43x45 mm
Weight:
0.56
Kg.
Product number:
7640182624361
Availability:
Available
Delivery Time:
1 - 2 days
Version
CHF 140.05*
Accessories
Please select here conveniently other products from Accessories and Similar items and add them to your order by clicking on the shopping cart in the desired quantity.
Product information "SWAY-AM LiPo 4S 15.2V 7300mAh 45C/90C EC5"
HIGH - Performance: 36C - 45C/ 90C
Motivation
More power? The standard is no longer sufficient for you? With the HIGH-Performance from Swaytronic you get a added value that you can feel!
Technology and performance
By adapting the cell chemistry of the Swaytronic HIGH-Performance LiPos, a higher power density is created, which has a positive effect on the current, the voltage and thus on the performance of the battery. For you this means: more power at almost the same weight.
Application
The HIGH-Performance line is focused on the RC car sector. Shockproof hard cases or model-specific and compatible batteries for Traxxas cars and other TOP brands in the RC car sector
Customer benefits
A battery segment that completely covers the RC car sector. Whether off-road or street machine. A LiPo which fits exactly into your model.
| Balance plug-in system: | XH |
|---|---|
| Brand: | Swaytronic |
| Configuration: | 4S1P |
| Connection cable (AWG): | 12 |
| Continuous discharge rate (C): | 45 |
| Design: | Soft case |
| Height (mm): | 45 |
| Length (mm): | 135 |
| Maximum discharge rate (surge) (C): | 90 |
| Nominal capacity (mAh): | 7300 |
| Performance Line: | High Performance |
| Plug-in system: | EC5 |
| Rated voltage (V): | 15.2 |
| Technology: | LiPo-HV |
| Watt hours (Wh): | 110.96 |
| Weight (gr.): | 560 |
| Width (mm): | 43 |
| ARRMA-RC models | INFRACTION 6S BLX ALL-ROAD |
|---|---|
| LIMITLESS ALL-ROAD SPEED BA SH | |
| MOJAVE 6S BLX | |
| NOTORIOUS 6S 4WD BLX | |
| OUTCAST 6S 4WD BLX | |
| SENTON 6S BLX | |
| TALION 6S 4WD BLX | |
| TYPHON 6S BLX Buggy |
Login
Warranty LiPo battery
Wear parts such as rechargeable batteries and batteries are excluded from the warranty by Swaytronic as well as by trade partners. Within the first 3 months from the date of collection or delivery, Swaytronic may, at its discretion, provide a voluntary warranty as a gesture of goodwill. However, this requires compliance with the safety regulations according to Article 7 of our GTC. Furthermore, an inspection of the damage in our company is mandatory. No warranty claim can be decided on the basis of pictures or other data.
Devices, models or accumulators which are equipped with a serial number will be recorded by us at goods receipt and goods issue and assigned to the end customer.
Removing the serial number (sticker/inscription) will void the warranty.
The complete warranty conditions can be found in our AGB`s:
Recommendations
Tip
SWAYTRONIC LiPo SAFE-BAG red
Swaytronic LiPo SAFE-BAG
Protect yourself and your surroundings with the Swaytronic LiPo-Safe Bag.Made from fireproof material for optimum initial protection.
ATTENTION
The Lipo Safe Bag is designed to provide initial protection in the event of a battery fire. These products are not suitable for long-term storage of LiPos and accumulators. For a storage solution, Swaytronic recommends the LiPo Safe Case.
Available
Tip
SWAYTRONIC LiPo Box black L
Swaytronic LiPo BOX black
Protect yourself and your surroundings with the Swaytronic LiPo BOX.Size: 250 x 150 x 100mm, made of fireproof material for optimal protection.
Available
High quality 3in1 battery balancer / discharger / Z
High quality 3in1 battery balancer / discharger / cell monitor
This balancer can be used for Lipo and LiFe batteries. It measures the cell condition and can be used as a balancer to optimally balance the cells. In discharge mode, the cells can also be prepared for winter storage, for example.The cell charge status is displayed during the entire balancing process. This means that faulty cells can also be detected quickly before a crash is risked in flight.Supported battery types: Li-Polymer / Li-Fe:2 - 6 cells / 7.4V -22.2V
Balance Setting Range (lower limit) : 2V - 4.2V (preset with 3.3V)
Discharge Setting Range (lower limit) : 2V - 4.2V (preset with 3.9V)
Available
Tip
SWAYTRONIC Charge Marker (2 pieces)
Swaytronic Charge Marker (2pcs.)
Charge Marker - manual charge level indicator red/greenWho doesn't know the problem of losing track of the charge level with many batteries? The solution now comes in the form of the small and ingenious Charge Marker. The Charge Marker can be
the Charge Marker can be attached directly to the battery using an integrated adhesive strip and can be used immediately.
Slide the slider to green after charging. After use, simply switch the slider back to red. This way you'll never lose control of the charge level of your batteries again and you'll always be ready for another flight!
Available
Tip
LiPo voltage tester 1S - 8S digital and programmable
LiPo voltage tester 1S - 8S digital and programmable
This voltage tester shows you the condition of your battery or cells within seconds.
1-8S Lipo / Li-ion / LiMn / Li-Fe.Voltage detection Accuracy: ± 0.01 V1S test mode Voltage range: 4-15VLow voltage alarm mode for 2-8SAlarm set point range: Off 2.7-3.8VWeight: 9g
Functions:
Display total voltage (all cells) and the individual voltage of each cell.During operation / use of a LiPo battery, the battery tester monitors the battery. The individual cells are permanently checked for their voltage and the alarm is automatically triggered when the set cell voltage of the cells is reached / undercut.Connect a battery (1-8 cells LiPo) to the balance plug of the battery tester. The voltage tester acknowledges the connection of the battery with 2 x 5 beeps. The display shows the total voltage (ALL) of the battery in volts and then changes to the voltage of the individual cells (No 1...No 2... No 3... etc.)
Setting the alarm for the cell voltage you want:
Press the button (lower edge button) once. The tester shows the currently set voltage value in volts (based on 1 cell). If this value corresponds to your wish, the programming is finished and the battery tester changes back to the home position in the display.If you want to change the alarm value, press the button twice. The battery tester switches to the next possible value.Repeat this step until the setting you want is displayed.
Programme options:
OFF / 2.70 V to 3.8 V at intervals of 0.10VPress the button once =display the set alarm valuePress the button twice=switch to the next valuePress the button several times to scroll through all values.
Recommendation:The alarm value should not be set below 3.3 volts! LiPo batteries react very sensitively to deep discharge.
Available
Tip
SWAYTRONIC LiPo SAFE-BAG white
Swaytronic LiPo SAFE-BAG
Protect yourself and your surroundings with the Swaytronic LiPo-Safe Bag.Made from fireproof material for optimum initial protection.
ATTENTION
The Lipo Safe Bag is designed to provide initial protection in the event of a battery fire. These products are not suitable for long-term storage of LiPos and accumulators. For a storage solution, Swaytronic recommends the LiPo Safe Case.
Available
Tip
SWAYTRONIC LiPo SAFE-BAG black
Swaytronic LiPo SAFE-BAG
Protect yourself and your surroundings with the Swaytronic LiPo-Safe Bag.Made from fireproof material for optimum initial protection.
ATTENTION
The Lipo Safe Bag is designed to provide initial protection in the event of a battery fire. These products are not suitable for long-term storage of LiPos and accumulators. For a storage solution, Swaytronic recommends the LiPo Safe Case.
Available
Tip
FIREBALLS Fire Protection - Fire Extinguishing Granules 5 litres
FIREBALLS Fire protection fire extinguishing granulate for lithium ion batteries / 5 litres
New and sensational.
This fire extinguishing granulate is the perfect solution for the safe storage and extinguishing of lithium polymer batteries in case of fire.With the fire extinguishing granulate you are also perfectly prepared for all lithium fires in your workshop. If a battery should ignite, you can extinguish it quickly, safely and above all cleanly with the granulate!The granulate is applied softly to the fire. The expanded glass granulate surrounds the fire and smothers it. At particularly high temperatures, the expanded glass melts and spreads over the surface of the burning metal. The melt forms an airtight seal that crusts over as it cools, extinguishing the metal fire. A reignition is effectively prevented.The fire extinguishing granulate is suitable for class D and lithium ion fire loads. Problematic fire loads such as metal fires, battery fires, lithium fires or flammable liquids can be controlled and extinguished with the granulate without causing extinguishing agent damage.The extinguishing effect of the granulate on metal fires was tested and confirmed by the MPA Dresden using a sodium and magnesium fire.
Product features
Forms a protective layerDisplaces oxygenEnvironmentally friendlyResistant to ageingLow weightEasy to handleRetrofittable and maintenance-freeVery good liquid bindingAcid and alkali resistant100% inorganic Inert, low-reactionLow weight (low landfill costs of contaminated material)Low heat conductionSound-absorbingNon-perishableBacteria- and germ-free
Technical data
Supplied in sealed plastic bagCapacity=5 litresBall size=1 to 4mmWeight with packaging=1.2kgPackaging/dimensions = 345x145mm
Available