SWAYTRONIC - Bluetooth Module Solar Charge Controller
Order until 15:00 at 29.04.2024 (Local time Europe/Zurich) and your order will be approx. shipped at the same day.
SWAYTRONIC
SWAYTRONIC - Bluetooth Module Solar Charge Controller
Measures:
51x67x24.5 mm
Weight:
0.16
Kg.
Product number:
7640182627140
Availability:
Available
Delivery Time:
1 - 2 days
CHF 35.00*
Accessories
Please select here conveniently other products from Accessories and Similar items and add them to your order by clicking on the shopping cart in the desired quantity.
Product information "SWAYTRONIC - Bluetooth Module Solar Charge Controller"
Swaytronic - Bluetooth Module Solar Charge Controller
Suitable for the models Tracer and DR (Duoracer) from Epever
Bluetooth module for pairing the solar charge controllers of the Duoracer and Tracer series from Epever via an IOS or Android device
Scope of delivery:
1 x Bluetooth module
1 x connection cable
| Brand: | Swaytronic |
|---|---|
| Connection options: | RJ45 |
| Height (mm): | 24.5 |
| Length (mm): | 51 |
| Weight (gr.): | 160 |
| Width (mm): | 67 |
Login
Recommendations
Tip
SWAYTRONIC - Solar plug-in system (pair)
SWAYTRONIC - Solar connector system (pair)
Swaytronic Solar Plug-in system IP 67 Compatible with MC4 plug-in system Swaytronic recommends only using plugs and couplings from the same manufacturer.
Scope of delivery:
1 x plug-in system circuit (W)1 x plug-in system circuit (M)
Available
Tip
SWAYTRONIC - Solar parallel circuit type 1
SWAYTRONIC - Solar parallel circuit type 1
Swaytronic Solar Parallel Circuit Type 1 IP 67 Compatible with MC4 connector system Swaytronic recommends using only plugs and couplings from the same manufacturer.
Scope of delivery:
1 x parallel circuit (W)1 x parallel circuit (M)
Available
Tip
SWAYTRONIC - Solar parallel circuit type 2
SWAYTRONIC - Solar parallel circuit type 2
Swaytronic Solar Parallel Circuit Type 1 IP 67 Compatible with MC4 connector system Swaytronic recommends to use only connectors and couplings of the same manufacturer.
Scope of delivery:
1 x parallel circuit (W)1 x parallel circuit (M)
Available
Tip
SWAYTRONIC - PV solar cable 4mm² 1 metre
SWAYTRONIC - PV solar cable 4mm²
Please add quantity/metre to shopping cart
Available
SWAYTRONIC - Solar charge controller DR2210N-DDS 20A
SWAYTRONIC - Solar charge controller DR2210N-DDS 20A
The DuoRacer MPPT charge controller is used to charge two batteries simultaneously.In this way, the supply battery and the starter battery can be charged simultaneously during operation.This controller supports sealed, gel, flooded, LiFePO4 and Li-NiCoMn batteries. The unit detects the system voltage of the starter battery and automatically switches to trickle charge.The controller uses the advanced MPPT control algorithm that detects the maximum power point while minimising power loss.The performance with MPPT technology is increased by 20-30% compared to the PWM charging method.If there is no manual operation for a long time and the charging conditions cannot be achieved, the controller will switch to energy saving mode, which reduces the loss and waste of battery power to extend the life of the products.System settings are indicated by the LED and LCD display and can be enhanced by the optional external MT11 display (accessory).The AES control signal of the auto-refrigerator is built into the controller, which supplies the refrigerator with excess solar energy and maximises efficiency.The controller has IP33 protection.Numerous protection functions such as battery overcharge protection, overdischarge protection and reverse polarity protection of the PV and battery are integrated in the unit.
Features:
- Maximum power point tracking technology with ultra-fast tracking speed and tracking efficiency of at least 99.5%- Advanced MPPT control algorithm to minimise MPPlost rate- Wider range of MPP operating voltage to improve PV module utilisation- Automatic control function for charging power and charging current limitation (BATT1)- Digital circuit control of adaptive three-stage charging mode to extend the life of BATT1.- The type of BATT1 can be set via LED / LCD.- The product will be put into energy saving mode if there is no manual operation for a long time and the charging conditions are not efficient- AES control signal for car refrigerator to avoid energy waste.- Standard Modbus protocol and RS485 communication port (5 V / 200 mA) to extend the application range
Scope of delivery:
1 x SWAYTRONIC - Solar charge controller DR2210N-DDS 20A1 x Operating instructions
Available
Sale %
SWAYTTRONIC - Solar charge controller DR3210N-DDS 30A
SWAYTRONIC - Solar charge controller DR3210N-DDS 30A
The DuoRacer MPPT charge controller is used to charge two batteries simultaneously.In this way, the supply battery and the starter battery can be charged simultaneously during operation.This controller supports sealed, gel, flooded, LiFePO4 and Li-NiCoMn batteries. The unit detects the system voltage of the starter battery and automatically switches to trickle charge.The controller uses the advanced MPPT control algorithm that detects the maximum power point while minimising power loss.The performance with MPPT technology is increased by 20-30% compared to the PWM charging method.If there is no manual operation for a long time and the charging conditions cannot be achieved, the controller will switch to energy saving mode, which reduces the loss and waste of battery power to extend the life of the products.System settings are indicated by the LED and LCD display and can be enhanced by the optional external MT11 display (accessory).The AES control signal of the auto-refrigerator is built into the controller, which supplies the refrigerator with excess solar energy and maximises efficiency.The controller has IP33 protection.Numerous protection functions such as battery overcharge protection, overdischarge protection and reverse polarity protection of the PV and battery are integrated in the unit.
Features:
- Maximum power point tracking technology with ultra-fast tracking speed and tracking efficiency of at least 99.5%- Advanced MPPT control algorithm to minimise MPPlost rate- Wider range of MPP operating voltage to improve PV module utilisation- Automatic control function for charging power and charging current limitation (BATT1)- Digital circuit control of adaptive three-stage charging mode to extend the life of BATT1.- The type of BATT1 can be set via LED / LCD.- The product will be put into energy saving mode if there is no manual operation for a long time and the charging conditions are not efficient- AES control signal for car refrigerator to avoid energy waste.- Standard Modbus protocol and RS485 communication port (5 V / 200 mA) to extend the application range
Scope of delivery:
1 x SWAYTRONIC - Solar charge controller DR3210N-DDS 30A1 x Operating instructions
on customer order
Sale %
SWAYTRONIC - Solar charge controller DR1206N-DDS 10A
SWAYTRONIC - Solar charge controller DR1206N-DDS 10A
The DuoRacer MPPT charge controller is used to charge two batteries simultaneously.In this way, the supply battery and the starter battery can be charged simultaneously during operation.This controller supports sealed, gel, flooded, LiFePO4 and Li-NiCoMn batteries.The unit detects the system voltage of the starter battery and automatically switches to trickle charge.The controller uses the advanced MPPT control algorithm that detects the maximum power point while minimising power loss.The performance with MPPT technology is increased by 20-30% compared to the PWM charging method.If there is no manual operation for a long time and the charging conditions cannot be achieved, the controller will switch to energy saving mode, which reduces the loss and waste of battery power to extend the life of the products.System settings are indicated by the LED and LCD display and can be enhanced by the optional external MT11 display (accessory).The AES control signal of the auto-refrigerator is built into the controller, which supplies the refrigerator with excess solar energy and maximises efficiency.The controller has IP33 protection.Numerous protection functions such as battery overcharge protection, overdischarge protection and reverse polarity protection of the PV and battery are integrated in the unit.
Features:
- Maximum power point tracking technology with ultra-fast tracking speed and tracking efficiency of at least 99.5%- Advanced MPPT control algorithm to minimise MPPlost rate- Wider range of MPP operating voltage to improve PV module utilisation- Automatic control function for charging power and charging current limitation (BATT1)- Digital circuit control of adaptive three-stage charging mode to extend the life of BATT1.- The type of BATT1 can be set via LED / LCD.- The product will be put into energy saving mode if there is no manual operation for a long time and the charging conditions are not efficient- AES control signal for car refrigerator to avoid energy waste.- Standard Modbus protocol and RS485 communication port (5 V / 200 mA) to extend the application range
Scope of delivery:
1 x SWAYTRONIC - Solar charge controller DR1206N-DDS 10A1 x Operating instructions
Available
15
SWAYTRONIC - Solar charge controller DR2210N-DDS 20A
SWAYTRONIC - Solar charge controller DR2210N-DDS 20A
The DuoRacer MPPT charge controller is used to charge two batteries simultaneously.In this way, the supply battery and the starter battery can be charged simultaneously during operation.This controller supports sealed, gel, flooded, LiFePO4 and Li-NiCoMn batteries. The unit detects the system voltage of the starter battery and automatically switches to trickle charge.The controller uses the advanced MPPT control algorithm that detects the maximum power point while minimising power loss.The performance with MPPT technology is increased by 20-30% compared to the PWM charging method.If there is no manual operation for a long time and the charging conditions cannot be achieved, the controller will switch to energy saving mode, which reduces the loss and waste of battery power to extend the life of the products.System settings are indicated by the LED and LCD display and can be enhanced by the optional external MT11 display (accessory).The AES control signal of the auto-refrigerator is built into the controller, which supplies the refrigerator with excess solar energy and maximises efficiency.The controller has IP33 protection.Numerous protection functions such as battery overcharge protection, overdischarge protection and reverse polarity protection of the PV and battery are integrated in the unit.
Features:
- Maximum power point tracking technology with ultra-fast tracking speed and tracking efficiency of at least 99.5%- Advanced MPPT control algorithm to minimise MPPlost rate- Wider range of MPP operating voltage to improve PV module utilisation- Automatic control function for charging power and charging current limitation (BATT1)- Digital circuit control of adaptive three-stage charging mode to extend the life of BATT1.- The type of BATT1 can be set via LED / LCD.- The product will be put into energy saving mode if there is no manual operation for a long time and the charging conditions are not efficient- AES control signal for car refrigerator to avoid energy waste.- Standard Modbus protocol and RS485 communication port (5 V / 200 mA) to extend the application range
Scope of delivery:
1 x SWAYTRONIC - Solar charge controller DR2210N-DDS 20A1 x Operating instructions
Available
Sale %
SWAYTRONIC - Solar charge controller DR1206N-DDS 10A
SWAYTRONIC - Solar charge controller DR1206N-DDS 10A
The DuoRacer MPPT charge controller is used to charge two batteries simultaneously.In this way, the supply battery and the starter battery can be charged simultaneously during operation.This controller supports sealed, gel, flooded, LiFePO4 and Li-NiCoMn batteries.The unit detects the system voltage of the starter battery and automatically switches to trickle charge.The controller uses the advanced MPPT control algorithm that detects the maximum power point while minimising power loss.The performance with MPPT technology is increased by 20-30% compared to the PWM charging method.If there is no manual operation for a long time and the charging conditions cannot be achieved, the controller will switch to energy saving mode, which reduces the loss and waste of battery power to extend the life of the products.System settings are indicated by the LED and LCD display and can be enhanced by the optional external MT11 display (accessory).The AES control signal of the auto-refrigerator is built into the controller, which supplies the refrigerator with excess solar energy and maximises efficiency.The controller has IP33 protection.Numerous protection functions such as battery overcharge protection, overdischarge protection and reverse polarity protection of the PV and battery are integrated in the unit.
Features:
- Maximum power point tracking technology with ultra-fast tracking speed and tracking efficiency of at least 99.5%- Advanced MPPT control algorithm to minimise MPPlost rate- Wider range of MPP operating voltage to improve PV module utilisation- Automatic control function for charging power and charging current limitation (BATT1)- Digital circuit control of adaptive three-stage charging mode to extend the life of BATT1.- The type of BATT1 can be set via LED / LCD.- The product will be put into energy saving mode if there is no manual operation for a long time and the charging conditions are not efficient- AES control signal for car refrigerator to avoid energy waste.- Standard Modbus protocol and RS485 communication port (5 V / 200 mA) to extend the application range
Scope of delivery:
1 x SWAYTRONIC - Solar charge controller DR1206N-DDS 10A1 x Operating instructions
Available
15
Sale %
SWAYTTRONIC - Solar charge controller DR3210N-DDS 30A
SWAYTRONIC - Solar charge controller DR3210N-DDS 30A
The DuoRacer MPPT charge controller is used to charge two batteries simultaneously.In this way, the supply battery and the starter battery can be charged simultaneously during operation.This controller supports sealed, gel, flooded, LiFePO4 and Li-NiCoMn batteries. The unit detects the system voltage of the starter battery and automatically switches to trickle charge.The controller uses the advanced MPPT control algorithm that detects the maximum power point while minimising power loss.The performance with MPPT technology is increased by 20-30% compared to the PWM charging method.If there is no manual operation for a long time and the charging conditions cannot be achieved, the controller will switch to energy saving mode, which reduces the loss and waste of battery power to extend the life of the products.System settings are indicated by the LED and LCD display and can be enhanced by the optional external MT11 display (accessory).The AES control signal of the auto-refrigerator is built into the controller, which supplies the refrigerator with excess solar energy and maximises efficiency.The controller has IP33 protection.Numerous protection functions such as battery overcharge protection, overdischarge protection and reverse polarity protection of the PV and battery are integrated in the unit.
Features:
- Maximum power point tracking technology with ultra-fast tracking speed and tracking efficiency of at least 99.5%- Advanced MPPT control algorithm to minimise MPPlost rate- Wider range of MPP operating voltage to improve PV module utilisation- Automatic control function for charging power and charging current limitation (BATT1)- Digital circuit control of adaptive three-stage charging mode to extend the life of BATT1.- The type of BATT1 can be set via LED / LCD.- The product will be put into energy saving mode if there is no manual operation for a long time and the charging conditions are not efficient- AES control signal for car refrigerator to avoid energy waste.- Standard Modbus protocol and RS485 communication port (5 V / 200 mA) to extend the application range
Scope of delivery:
1 x SWAYTRONIC - Solar charge controller DR3210N-DDS 30A1 x Operating instructions
on customer order